High Speed Homogenizer, Lab Disperser Emulsifier, Overhead Homogenizer Mixing, 8000 to 22000RPM Lab Homogenizers Emulsifier Disperser with Two Working Heads for Lab, School， 110V

SpecificationsMaterial: Cold Plate, RubberProcess: Spray Painting Color: White, SilverStyle: ModernPlug Standard: US StandardPower Type: Corded ElectricMotor Type: Pure Copper MotorDisplay Type: Digital DisplayOperation Mode: Knob Infinitely Adjustable Speed Is Assembly Required: YesContinuous Working Time: 3 MinutesAmbient Temperature: 10-45℃/50-113℉Speed: 8000-22000rpmMax. Processing Volume Range: 5-1000ml/0.17-33.81OzVoltage: 110VPower: 185WPower Cord Length: 1.3m/4.27ftWorking Heads Size(D*H):1212G: 12*120mm/0.47*4.72in1218G: 18*120mm/0.71*4.72inWorking Heads Speed Range:1212G: 8000~18000r/min 1218G: 8000~20000r/min Gross Weight: 7kg/15.43lbsNet Weight: 6.8kg/14.99lbsProduct Size: 17.5*26.8*48cm/6.89*10.55*18.9inPackage Size: 34*25*46cm/13.39*9.84*18.11inPackage Included1* High-speed Homogenizer4* Measuring Cups2* Working Heads1* Power CordAll Accessories for AssemblyNotes1.When the power supply suddenly goes out during use, please check if there is any detachment of the power cord plug.2.Please place the instrument on a horizontal workbench, install the required homogenizing knives must be in place, turn on the power to try the machine first with a cup or vessel containing water, so that the plum blossom cutter head is submerged in the water, turn on the power switch, slowly adjust the speed knob to fast, no obvious metal friction sound (such as metal friction sound, turn off the power and loosen the cutter support tightening screws, will be the external fixing set randomly turned up to install in place, and then tighten it again). Finish before working.3.Please cut the plants or microorganisms to experiment into small pieces or slices (not included), put them in the randomly equipped glassware, clamp them in the middle of the magnet holder (heptagonal shape), loosen the fixing motor seat supporting screw, slowly align the mouth of the vessel downward, so that the homogenizing head is 0.08-0.12 inches away from the bottom of the vessel as good, and then tighten the screw.4.Please note that after each job, remove the tool and rinse it with water to dry.5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order."

• High Speed Homogenizer: It is made of cold plate and rubber through the spray painting process, which makes it heat-resistant, rustproof, and corrosion-resistant, with high durability and ensures long-term use.
• Wide Working Range: You can adjust the working speed of the homogenizer by turning the button. When used at high speed, it can make all kinds of animal and plant tissues to achieve the purpose of homogeneous mixing, cell membranes can be broken and separated, and DNA strands can be broken into small molecules at different speeds. At low speed, it can be used as a mixer.
• Large Capacity: With an emulsifying volume of 0.17-33.81Oz, this product can meet your mixing needs. It is very suitable for most kinds of laboratory experiments, such as chemical reactions and biological experiments.
• Laboratory Assistant: High-speed homogenizer with inhalation homogenization function, which can carry out efficient emulsification and homogenization between two kinds of non-phase solutions, and can emulsify the trace organic matter in water, and extract the fat-soluble substances and organic solvent-soluble substances, which can satisfy most of the experimental needs.
• Widely Used: It is suitable for the uniform emulsifying or mixing of various animal and plant tissues in the fields of scientific research, the chemical industry, agriculture, the medical sector, research institutes and laboratories of colleges and universities."